Table 3—These commands can be sent to the thermostat via Ethernet. They adjust variables that cannot be changed via local control (i.e., the e-mail triggers are only enabled and disabled through the Ethernet). The thermostat has no local control over this function, although it is responsible for sending an Ex command if e-mail triggers are enabled.
| Command type | Command |
| State | S0 or S1 (0=off, 1=on) |
| Request information | IN |
| Low temperature threshold | Axx (where xx = LOWWARNINGH, LOWWARNINGL) |
| High temperature threshold | Zxx (where xx = HIGHWARNINGH, HIGHWARNINGL) |
| E-mail triggers | N0 or N1 (0=disable, 1=enable) |