Table 1—The thermostat sends these commands whenever a change occurs (i.e., you change the heat set point or the temperature falls below the heat set point).
|
Command
type
|
Command
|
| Fan | F0 or F1 |
| Mode | MA, MH, MC, or MO |
| Heat set point | Hxx (where xx = HEATSETPOINTH, HEATSETPOINTL) |
| Cool set point | Cxx (where xx = COOLSETPOINTH, COOLSETPOINTL) |
| HVAC Status | SI, SH, SC, or SO |
| Temperature | Txx (where xx = TEMPH,TEMPL) |
| E0, E1, or E2 |