Setting	Values
Output device	None, sound playback, X-10 device, local auxiliary output, remote auxiliary output
X-10 code (X-10 device only)	House code A–P, unit code 1–16
Output duration	0–15 s
Start time	0:00–23:59
Stop time	0:00–24:00
Enabled sensors	Accelerometer, E-field, pressure, switches
Multiple sensors required	1–4
Multiple activations required	1–8
Multiple activation interval	0–7 min
Repeat activation hold-off time	0–31 min

Table 1—The configuration menus enable you to set the output device and activation parameters for each virtual output channel. For an X10 device, setting the duration to 0 will result in an on command without a corresponding off command.