The ARM7X development board is designed for prototyping, laboratory, and OEM use. The board hosts an Atmel AT91SAM7X256 processor, running at 48 MHz, along with RS-232, RS-485, USB, CAN, and 10/100 Ethernet ports. It also has an on-board RTC, and a 16-pin Optrex compatible LCD interface.

Included with the board is a version of FreeRTOS that has been modified to support the I/O, PHY, and RTC, as well as other aspects of this ARM7X development board that will get your application up and running quickly. A 20-pin, polarized, JTAG connection is provided for in-system programming and debugging. The ARM7X development board can also be programmed through the RS-232 port using the ARMBL-PC bootloader application.

The on-board SD/MMC memory module connector can provide tremendous storage and can be accessed with MS-DOS compatibility using the FlashFile-ARM-SD source code package. On-board switch-mode regulation allows for power inputs from 8 to 38 VDC with an LED power indicator. Termination is provided for 5-VDC output with up to 2 A of combined load. There are even four connections for standard R/C servos for those RCoIP projects!

The development board costs $199. Quantity discounts are available.

Priio
www.priio.com