Nine new CMX software products that are fully integrated with the powerful Keil µVision3 for ARM tool suite are now available.

CMX-RTX is a truly preemptive, multitasking RTOS. It offers the smallest footprint, the fastest context switching times, and the lowest interrupt latency times available on the market today. CMX-Tiny+ is a real-time kernel specially designed for processors with a small amount of RAM embedded on the processor’s silicon. This allows you to develop application code and have it run under an RTOS using only the on-board RAM that the processor provides.

CMX-MicroNet is a TCP/IP stack with an extremely small ROM requirement ranging from 3.5 to 16 KB, depending on configuration and processor. This networking tool resides and runs directly on the processor with no gateway required. CMX-TCP/IP is a portable, ROM-able, reentrant, and multitasking TCP/IP stack for embedded processors. It’s a fully RFC-compliant system offering full functionality to support most embedded systems networking requirements.

CMX-FFS is the standard edition flash memory file system for embedded systems developers. It includes 100% failsafe, multiple volumes, wear leveling, directories, boot sector support, and standard drivers for NOR flash memory chips as well as RAM. CMX-FFS-NAND is a NAND flash memory driver for CMX-FFS and CMX-FFS-FAT. It includes 100% failsafe, wear leveling, and ECC algorithm. 

CMX-FFS-FAT is a full-featured file system for embedded systems developers who want to add devices to their products that require FAT12/16/32 compliant media to be attached to them. It includes long filenames, multiple volumes, and the following drivers: CompactFlash (true IDE and memory I/O), MMC/SD (SPI S/W or H/W), and RAM. CMX-FFS-THIN is a scalable, reduced footprint file system designed for integration with 8- or 16-bit embedded processors with limited resources and includes FAT 12/16/32, long file names, and the following drivers: CompactFlash (true IDE and memory I/O), MMC/SD (SPI S/W or H/W), and RAM. 

CMX-CANopen allows for optimized implementations of CANopen conformant devices. It was developed to allow for maximum task optimization, especially when used with an RTOS such as CMX-RTX.

All CMX software is licensed with a one-time, economical fee. It features full source code, no royalties on shipped products, and free technical support and software updates. Pricing for CMX-Tiny+ starts at $3,000.

CMX Systems, Inc.
www.cmx.com