|
New
Product News
UNIVERSAL
IC PROGRAMMER
The
Superpro 3000U is a USB-interfaced (PC-hosted mode),
ultrahigh-speed universal device programmer. It is also
designed for use in Stand-alone mode, via the built-in keypad/LCD
with memory storage media, as well as in Terminal mode,
which is utilized via an external instrument such as an
IC handler, terminal, or controller.
The
Superpro 3000U is compact; it weighs less than 2 lbs. The
standard 48-pin driver supports devices down to 1.5 V, and
a 100 pin-driver expander, PEP3000, allows for the programming
of devices with up to 100 pins.
The
advanced hardware design of the unit greatly minimizes ground
bounce noise that enables the programming of low-voltage
(down to 1.5 V) devices reliably. In addition, only IC manufacturer-approved
programming algorithms are used, and it includes ± 5% and
± 10% VCC verification to enhance programming
reliability. The total number of devices supported will
soon reach 11,000, and it covers up to 100 various IC manufacturers.
Free
device-supporting software updates are available on the
Internet. Additional features include pin continuity and
wrong-chip insertion check, over-current and over-voltage
protection, auto start, history and batch command, as well
as the capability of clustering multiple units for gang
programming. The Superpro 3000U costs $995.
Xeltek,
Inc.
(408) 588-9942
www.xeltek.com
|
